Metrohm µStat 300 Dropsens BiPotentiostat

Description

Metrohm µStat 300 Dropsens BiPotentiostat

is the portable BiPotentiostat from Metrohm DropSens that can be applied for Voltammetric and Amperometric measurements, including 9 electroanalytical techniques, and can be used with one- or two- working electrodes configuration.
The new portable bipotentiostat is Li-ion Battery powered (USB charger adapter compatible). It can be easily connected to a PC via USB, RS232 and Wireless connection.

Metrohm µStat 300 has seven current ranges: 1 nA to 1 mA, and Auto (the instrument automatically selects the optimal
current range), with a maximum measurable current of 3 mA. The supplied DropView 8400 software for Windows is used to control the instrument and to plot the me- asurements and perform the analysis of results. DropView 8400 software provides powerful functions such as:
-manual control of the experiment, for tailoring your electrochemical measurements
-plot overlay, peak integration, smoothing, subtraction, derivative curve, baseline fitting, etc
-script editor for programming specific work routines
-peripheral configuration (digital inputs/outputs) for synchronised operation with other devices
-3D plotting of curves

Metrohm µStat 300 Techniques:

Voltammetry
LSV Linear Sweep Voltammetry
CV Cyclic Voltammetry
SWV Square Wave Voltammetry
DPV Differential Pulse Voltammetry
NPV Normal Pulse Voltammetry

Amperometry
AD Amperometric Detection
PAD Pulsed Amperometric Detection
MAD Multipulsed Amperometric Detection
COUL Coulometric Detection

Instrument Specifications
Power Li-ion Battery (1250 mAh); USB; DC charger adaptor compatible (5V)
PC interface Wireless connection USB
Operating modes BIPotentiostat, Potentiostat
1x 8 Channel Potentiostat
DC-Potential range ±2 V
Current ranges ±1 nA to ±1 mA (7 ranges)
Maximum measurable current 3 mA
Voltage ranges ±100 mV, ±1 V (2 ranges)
Applied Potential Resolution 1 mV
Measured Current Resolution 0.025 % of current range
1 pA on lowest current range
Potential Accuracy ±0.2 %
Current Accuracy ≤0.5 % of current range at 100 nA to 10 mA
External inputs/outputs Iout, Eout
2 Analog inputs
1 Analog output
2 Digital input/outputs
TX, RX, RTS signals for RS232 connection
LED indicators Power, Status, Measuring, Wireless connection
Dimensions 13.2 cm x 10.0 cm x 3.6 cm (L x W x H)
Weight 480 g

Control Specifications
Pretreatment Conditioning stage duration: 0 – 1300 s
Deposition stage duration: 0 – 1300 s
Equilibration stage duration: 0 – 1300 s

General Parameters
Ebegin, Eend, Ebase, Evtx1, Evtx2: -2 V to +2 V
Step potential: 1 mV to 500 mV
Pulse potential: 1 mV to 250 mV
Scan rate: 1 ms up to 1.3 s per step
WE2 offset: ± 1

Metrohm µStat 300 Specific Parameters
SWV
Frequency: 1 Hz to 400 Hz
Amplitude: 1 mV to 250 mV

DPV, NPV Modulation time:1 ms to 1300 ms

Chrono Methods (AD, MAD, ZRA, COUL)
Pulse time: 1 ms to 1300 ms
Interval time: 0.1 s to 1300 s

PAD
Run time:Hours (65000 points)
Pulse time: 1 ms to 1300 ms
Interval time: 10 ms to 1300 ms
Run time:Hours (65000 points)

Datasheet Manual PDF :

https://www.jpnpartsale.com/refund_returns/