HPEVS AC-50 96V + Curtis 1238-7971

Description

HPEVS AC-50 96V Brushless AC Motor Kit With 96V with Curtis 1238-7971 Controller.

The AC 50 motor is an 8″ motor that is capable of producing 71 horsepower and 120 ft-lbs. of torque. It was designed for use in an automotive application with a curb weight of 3500 lbs or less. This system is used in other vehicles that require the torque and horsepower that this motor supplies. It is available with or without a 7/8″ auxiliary shaft.

HPEVS AC-50 96V + Curtis 1238-7971 Package Include :

• HPEVS AC50 Motor
• Curtis 1238-7971 Controller
• 35 Pin Connector and Wire Harness
• Gigavac GV200-QA Contactor
• 12 Volt HV Relay
• Curtis 840 Dash Gauge
• SPST Menu Button
• SPST Mode Switch

HPEVS AC-50 96V + Curtis 1238-7971 Spec Sheet :

• Motor Face: B-Face
• Motor Diameter: 8.980 Inches
• Motor Case Length: 13.798 Inches
• Motor Shaft Length End to End: 17.5 Inches
• Motor Type: AC Induction
• Brushes: No
• Interpoles: No
• Weight: 52 Kg (115 lbs)
• Max Voltage Input: 130
• Terminal Stud Size: 3/8 Inch
• Integrated Sensors: Encoder
• Rated Torque: 120 Lb Ft
• Rated Power: 71 HP
• Continuos RPM: 5,000
• Max RPM: 10,000
• RPM Sensor: No
• Drive End Shaft: 1 1/8 Inch With 1/4 Inch Keyway
• Acc/Commutator End Shaft: Optional 7/8 Inch With 3/16 Keyway
• Timing: N/A
• Max Efficiency: 88%
• Thermal Cooling: Internal Fan
• Max Temperature: 180 Degrees Celsius (356 Degrees Fahrenheit)
• Matching Controller Included In Price: Curtis Controller 1238e-7621

Additional Informations :
With the introduction of the new Curtis 144 volt controller we are now offering the AC-51 motor. This motor is designed to work with the new controller allowing for peak torque to go out further in the RPM range.

The AC 51 motor is the same 8″ motor that has been designed around the Curtis 144 volt controller. It is capable of producing 88 horsepower and 108 ft-lbs. of torque. It was designed for use in an automotive application with a curb weight of 4000 lbs or less. This system is used in other vehicles that require the torque and horsepower that this motor supplies. It is available with or without a 7/8″ auxiliary shaft as well.

The weight of the AC 50 and AC 51 motors are around 115 pounds/52.2 Kg.

This motor is also very popular in the mining industry. We manufacture an enclosed (not water proof) version of this motor that is used for personnel carriers.

Link to power graphs : https://www.hpevs.com/hpevs-ac-electric-motors-power-graphs-ac-50.htm

https://www.jpnpartsale.com/refund_returns/