ETCR5000 Power Quality Analyzer

Description

ETCR5000 Power Quality Analyzer 3 Phase Power Quality Analyzer Logger

ETCR5000 Power Quality Analyzer Features:

• 5.6 inch display

• 4 current clamp sensor

• 4-channel current and voltage measurement

• Automatic shut-down; Backlight function

• Transient capture function

• Trend chart recording and storing function

• Alarm function; Snapshot function

ETCR5000 Power Quality Analyzer’s Basic Function:

1. Transient capture function

• Monitoring instantaneous change of power grid voltage current parameters, including the voltage current fluctu-ations, voltage current surge, sag and short supply interruption, temporary overvoltage, impact current and Cur-rent voltage instantaneous distortion.
• Instruments can store 150 sets of transient waveform at the same time.

2. Starting current monitoring

• Monitoring surge current of line and the startup current when electrical equipment is starting, help to correctly design capacity.
• Can be display the RMS rising / falling curve In the startup process, the envelope curve of startup current, waveform of 4 channels current and 4 channels voltage.
• Recording about 100s after trigger, storage the current /voltage instantaneous and waveform curve of each cycle in 100s.

3. Trend chart recording and storing function

• Store all the test parameters of basic test functions (Urms, Uthd, Ucf, Uunb, Hz, Vrms, Vthd, Vcf, Vunb, PST, Arms,  Athd, Acf, Aunb, KF,W, VAR, VA, PF, COSφ, TANφ),50 voltage harmonics, 50 current harmonics. And create the trend curve. 
• Record data for a long time according to need(concurrent selection 20 parameters to record data for once every five seconds, you can record about 300 days.).

4. Alarm function

• Set the limit values according to need, monitoring the values whether overshoot, if overshoot will generate an alarm log, such as: voltage, current, unbalance, harmonic ratio, frequency, active power, total harmonic distor-tion.
• You can configure 40 different alarms, each group can set different monitoring parameters (including 50 harmonics, total of 123 different parameters) and limit values, also can set the shortest time of overshoot.
• The log can contain up to 12,800 alarms.

5. Snapshot function

• Any screen can be saved (screen snapshot), at the same time automatically records the time and test mode.
• Such as can save voltage and current waveform, harmonic bar chart, phasor diagram etc.
• It can save a maximum of 60 screen snapshot.

6. Communication function

• Communicate with computer via USB; 
• Monitoring software can display waveform of power quality analysis, read of the transient waveform, trend chart recording, alarm log, screenshots, and display on the computer.

7. Setting function

• The user can configuration of the time and date, configuration of the screen contrast and brightness, definition of each phase curve colors.
• Choice of type of connection to the net work.
• Configuration of the type of the current sensors and voltage ratios.
• Select Chinese menu or English menu.

8. Help menu in Chinese/English

• Every stage of operation can press the “help” key to obtain relevant information.

Specification:

Power Supply	Rechargeable lithium battery pack 9.6V, external charger.
Battery indicator	Battery symbol 5 grid Show the power, when the battery power is too low, prompted 1 minutes after the automatic shutdown.
Working current	Current 490mA, the battery is full of electricity for about 8 hours of continuous work.
display mode	LCD Color screen, 640dots * 480dots, 5.6 inch display domain 116mm * 88mm.
Clamp size	008B: φ8mm; 040B: φ40mm; 068B: φ68mm; 300F: φ300mm
Instrument size	240mm*170mm*68 mm.
Total Weight	6KG
Channel number	4-CH voltage, 4-CH current.
Line voltage	1.0V~2000V.
Phase voltage	1.0V~1000V.
Electric current	008B/040B/068B/300F Current clamp
frequency	40Hz~70Hz.
Electric quantity parameter	W, VA, Var, PF, DPF, cosφ, Tanφ
Electric energy parameters	Wh, Varh, Vah.
Harmonic	Yes, 0~50 times.
Total harmonic distortion	Yes, 0~50 times, each phase.
Expert mode	Yes.
Transient recording	150 Groups.
Voltage flicker	Yes.
Starting current mode	Yes, 100 seconds.
Three-phase unbalance degree	Yes.
Record	300Day (record 20 parameters simultaneously, 1 points per 5 seconds).
Min / Max Record value	There are, can be measured for a period of time the maximum and minimum value.
Give an alarm	40Different types of parameter selection, 12800 groups of alarm log.
Peak value	Yes
Phasor diagram display	Automatically.
Screenshot capacity	60A.
Menu language	English and chinese.
communication interface	USB
Automatic shutdown	In the alarm / trend chart recording / transient capture mode (waiting or in the middle), the instrument does not automatically shut down.
	In other test mode, no button operation within 15 minutes, 1 minutes after the automatic shutdown.
Backlight function	There is, for the dark places and at night.
Voltage test line	3m
Current clamp length	2m
Working temperature and humidity	-10C~ 40 degrees C; 80%Rh below.
Storage temperature and humidity	-10C~ 60 degrees C; 70%Rh below.
Input impedance	The input impedance of the test voltage is 1M.
Pressure	The instrument circuit and the outer shell withstand 3700V/50Hz sine wave alternating current voltage for 1 minutes.
insulation	Between the instrument line and the jacket shell is larger than 10M.
structure	Double insulation with anti-insulation vibration jacket.
Safely Standard	IEC 61010 1000V Cat III / 600V CAT IV, IEC61010-031, IEC61326, Pollution degree: 2.
Accessories	Host: 1PCS; Instrument Bag: 1pcs; Test Cable: 5PCS (yellow, green, red, blue, black); Alligator Clip: 5PCS; Probe: 5PCS; Charger 1PCS; Software CD: 1COPY; Optional Current Clamp: 4PCS

ETCR5000 Power Quality Analyzer Parameters of current clamps:

Model	008B	040B	068B	300F
Function	AC current and leakage detection
Test model	Clamp CT, Current induction output
Clamp size	Φ8mm	Φ40mm	Φ68mm	Φ300mm
Current range	AC 10mA~10.0A	AC 0.1A~100A	AC1.0A~1000A	AC10A~6000A
Resolution	0.1mA
Accuracy	0.5% (23℃±3℃, below 70%RH)
Current transform	Around 1A/1mA
Circuit voltage	Lower than AC600V
Cable length	2m
Working environment	-20℃~50℃; below 80%RH
Storage environment	-10℃~60℃; below 70%RH
Weight	170gX4	190gX4	510gX4

ETCR5000 Power Quality Analyzer Package:

• 1x ETCR5000 Power Quality Analyzer
• 4x Current Clamps (4 types Optional)
• 5x Test Cable (yellow, green, red, blue, black)
• 5x Alligator Clip
• 5x Probes
• 1x Charger 
• 1x Software CD
• 1x Instrument Bag

ETCR5000 Power Quality Analyzer Datasheet User Manual PDF :

https://instrucam.cl/wp-content/uploads/2023/01/ANALIZADOR-5000.pdf

https://www.jpnpartsale.com/refund_returns/